Description

Slightly Used Inogen One G5 Replacement Columns (Sieve Beds)

In order to create medical grade oxygen, your slightly used Inogen One G5 relies on the sieve beds located in the replacement columns.

The slightly used Inogen One G5 replacement column set are replacement sieve beds for your slightly used Inogen One G5 portable oxygen concentrator!

You will have to regularly change your replacement columns to keep your slightly used G5 in pristine working order.

It’s recommended that you change your replacement columns every 12 to 18 months to maximize the life of your unit.

However, the frequency that you will need to change these columns is all dependent on the climate you live in, how often you use your concentrator, and if you store your concentrator properly.

No need to worry, your slightly used Inogen One G5 will tell you when it’s time to replace the sieve beds.

What is Included With the Replacement Columns:

• 2x Replacement Columns

Simple and Tool Free Replacement

Replacing your slightly used Inogen One G5 sieve beds is incredibly simple. You don’t need any additional tools and it should only take you a couple of minutes. Here are step-by-step instructions on how to replace your sieve beds:

Step 1: Turn off the slightly used Inogen One® G5 concentrator by pressing the power button to shutdown the device

Step 2: Remove the slightly used Inogen One® G5 concentrator from the carry case

Step 3: Remove the battery from the slightly used Inogen One® G5 concentrator

Step 4: Place the slightly used Inogen One® G5 concentrator on its side so that the underside is visible. The metal column assembly can be seen on one side of the device

Step 5: Unlock the column assembly by pushing the latch button away from the columns

Step 6: While holding the button open, slide the column assembly out of the device by pulling on the column pull handle

Step 7: Remove the columns completely from the slightly used Inogen One® G5. Both columns are removed as one piece

Step 8: Column (metal tube) Installation: Remove dust caps of new column assembly. Make sure there is no dust or debris where the dust caps were located

Step 9: Insert column assembly into the slightly used Inogen One® G5 concentrator. Do not leave the column ends exposed; column assembly should be inserted into the slightly used Inogen One® G5 as soon as the dust caps have been removed

Step 10: Push the column assembly into the device such that the columns are fully seated into the slightly used Inogen One G5 concentrator. The spring loaded latch button should fully return to the closed position

Step 11: Connect the AC power supply cord to the slightly used Inogen One® G5 and plug the power supply AC cord into an electrical outlet. Do Not Power on the slightly used Inogen One® G5 concentrator

Step 12: Press and hold the plus (+) and (-) minus button for 5 seconds. The screen will display the following informational icon. Release button once icon is displayed on screen.

Step 13: Press the alert button once and screen will display the following informational icons.

Step 14: Press the power button to turn on the slightly used Inogen One G5, and use normally.

The Importance of the Slightly Used Inogen One G5 Replacement Column Sieve Beds

When it comes to sieve beds, without functioning replacement column sieve beds your slightly used Inogen One G5 is essentially useless.

The sieve beds are located in the replacement columns and they are responsible for turning normal, ambient air into medical grade oxygen.

As you use your slightly used Inogen One G5, your sieve beds are working nonstop to filter out impurities in the air to provide you with the medical grade oxygen you need.

But, as you continue to use your slightly used Inogen One G5, the more wear and tear you put on your sieve beds.

So, rather than requiring you to send your concentrator in for warranty repair, leaving you without a machine, Inogen conveniently made the sieve beds a replaceable accessory that you can do at home!

Now, depending on how often you use your concentrator and your climate your sieve beds may last up to 18 months, or they may last 12 months.

It really all depends on your personal situation.

To help you prevent any down time where you won’t be able to use your concentrator, your slightly used Inogen One G5 will notify you BEFORE you actually need sieve beds so you still have time to order your replacement columns.